|
|
Brass Air Fittings, Brass Pneumatic Fittings, Air Fittings, Pneumatic Fittings, Push To Connect Fittings |
 |
| |
| Full nickel plated brass Air fittings are superior to normal pneumatic fittings (brass and plastic) on bearing capability of working pressure and temperature. The retained brass collet gives superior tube anchorage. Available metric tube OD. are 4mm 5mm 6mm 8mm 10mm 12mm 16mm. Imperial tube OD. are 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2". |
|
Pneumatic Fittings, Push In Fittings, Air Fittings, Push To Connect Fittings, Inch Push To Connect Tube Fittings |
| Inch Tube - NPT / UNF Thread |
 |
Inch Tube with NPT thread, Inch pneumatic Composite Push In fittings, (Inch Hose Air Fittings, imperial Tube push to connect fittings) are very popular in USA, Canada, Mexico, Peru, Colombia and Brazil. Tube O.D sizes include 1/8", 5/32", 3/16", 1/4", 5/16", 3/8" and 1/2", threads sizes are NPT1/8", NPT1/4", NPT3/8" and NPT1/2".,
How to order composite push in fittings |
|
DOT Push To Connect Air Brake Fittings |
 |
DOT Approved Push To Connect Fittings, CA360 Brass material, Viton sealing, Loctite thread sealant, Each Fittings 100% Teested and quality warranty, Brass D.O.T. Push-In Air Brake Tube Fittings Meets D.O.T. FMVSS 571.106 SAE J1131 Air Brake System Requirements Advantage Of D.O.T. Push To Connect Fittings, Inch tube size from 1/8", 3/16, 5/32, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 etc.
How to order DOT Push In Fittings |
|
|
|
NingBo Pace Pneumatics Co Ltd
- Contact Information:
Email:
pace@china-pace.com
Telepone:
(86) 153 8194 5096
Fax:
(86) 574 8724 5124
Skype:
pace-fred
Follow us:
     
|
|
|
|
|
|
|
| Pneumatic Connection Solutions: Pneumatic Fittings, Air Fittings, Push To Connect Fittings, Pneumatic Connectors. |
|
|
| Application |
Features |
| 1. Quick disconnect simply push tubing in, no tools or loose parts to handle in tight places. |
1. Brass construction. Elbows and tees are forged brass. |
| 2. Full flow design, provides up to 60% more flow area than conventional fittings with internal tube supports. |
2. Swivel elbow and tees for ease of orientation. |
| Construction |
3. DOT approved. Pre-applied PTFE based pipe sealant on all male pipe threads, Viton (FKM) O-ring sealing in all of fittings |
| Assembly |
Disassembly |
 |
 |
| Insert tube end into fitting, sliding I.D. of the tube over insert (friction is felt as tube slides past O-Ring). Continue to push tube in until it bottoms out. |
Use thumb and forefinger to disconnect tube. Hold down the top of the insert against the fitting body and pull out the tubing with the other hand. No tools needed. |
|
4. Typical Applications: windows, door locks, mirrors, wipers, air operated seats, operating gauges, air horns, heater controls, gear shifts, fifth wheels, and air brake connections. |
|
| Specification |
|
| Fluid |
Air, Vaccum |
|
| Pressure Range |
0~250PSI |
|
| Max Pressure |
Determined by maximum working pressure of the recommended plastic tubing |
|
| Material |
CA 360 Brass |
|
|
| Temperature Range |
-30 to +250 °C |
|
| Applicable Tube |
PU (Polyurethane) |
PA (Nylon) |
|
| DOT Push To Connect Air Brake Fittings |
Meets D.O.T. FMVSS 571.106 SAE J1131 Air Brake System Requirements
Advantage Of D.O.T. Push To Connect Fittings
- Fast assembly: No tools required. Simply push tubing in. Saves up to 75% of assembly time compared to standard air compression fittings. No loose parts to handle.
- Fast disconnect: Hold the collet collar with two fingers and pull out tube. No tools required.
- Reusable: Can be connected and disconnected several times.
- Reliable sealing: Using recommended tubing, full sealing is guaranteed.
- Versatility: Viton (FKM). Secure Tube Retention. Pulling on tubing only serves to tighten the connection.
- Pre-Applied Teflon based pipe sealant on all male pipe threads, saving customer additional labor.
- Full Flow Design, provides more flow area than conventional fittings with internal tube supports even in the swivels.
DOT Fittings are constructed with an all brass captive eyelet which allows for maximum flow. The brass captive eyelet with extended length is floating and has a machined top end radius for easy instal-lation of tubing. All male threads have a pre-applied Teflon based pipe sealant to provide for easy assembly and leak proof seal.
Materials: CA360 Brass (Barstock), CA377 (Forged) "O" Ring: FKM ( Viton sealing)
Ordering Options
The following options are available only by customer request and may be subject to minimum run quantities for ordering.
-Other Material of "O" Ring seals.
-Metric Tube DOT "One-Push" tube fittings with BSP threads.
|
| DOT Certificate (NHTSA) |
| Click → How to order D.O.T. push to connect fittings |
|
|
|
|
Model: DMPC |
Model: DMPCF |
Model: DMPL ( No Swivel ) |
Model: DMPLS ( Swivel ) |
|
|
|
|
|
Model: DMPLF ( No Swivel ) |
Model: DMPLFS ( Swivel ) |
Model: DMPB ( No Swivel )
|
|
|
|
|
|
|
Model: DMPU |
Model: DMPV |
Model: DMPE |
Model: DMPD ( No Swivel ) |
|
|
|
|
|
|
 |
Model: DMPDS ( Swivel ) |
Model: DMPM |
DMPL45 ( No Swivel ) |
DMPL45S (Swivel ) |
|
|
|
|
Accpet: Custom Made DOT Fittings for Metric Tube, UNF Thread, BSPP Thread, Metric Thread, Any other Sizes and Types |
|
PACE can also supply Nickel Plated Brass DOT Push To Connect Fittings, white thread sealant
(Metric Tube , Inch Tube , NPT Thread, Metric Thread With O-ring) |
 |
| |
 |
|
|
Pneumatic Fittings, One touch tube fittings, Push in fittings, Air fittings, push to connect fittings, Push To Connect Tube fittings, All metal push in fittings, brass air fittings, Steckverschraubungen, Pneumatik-Zubehör, Pneumatyka, Drosselrückschlagventile, alle Gewindefittinge mit geradem G-Gewinde, NPT-Gewinde, NEUMÁTICA RACORES, Pneumatique raccord, Raccorderia. Plastic Pneumatic Fittings, Pneumatic Accessories, Pneumatic Push in Fittings, One Touch Fittings, Nickel Plated Brass Push in Fittings, Air Flow Control valves, Pneumatic flow control valves, Hand Valves, Air Silencers, Air Muffler, Nylon Tubing, Air Tubing, Quick Couplers, Air Line Fittings, Airline Fittings, Quick coupling, Push to Connect Tube Fittings, Pneumaitc Instant fittings, Metal Push in Fittings, Brass Air Fittings, Metal Instant Fittings, Brass Instant Fittings, Metal One Touch Fittings, Brass One Touch Fittings, Compact One Touch Fittings, Push in air fittings, Push in Instant Fittings, Tube Fittings, Air Quick Fit Fittings, Speed Controllers, Air Flow Control Valves, Hand Valves, Air Blow Guns, Mini Push in Fittings, Brass Fittings, Miniature Pneumatic push to connect fittings, Metric Push in Fittings, Compact One Touch Fittings, Flow Controller, Pneumatic Couplings, all brass air Fittings, Heavy Duty Air Duster Gun, Hand Throttle Valves, Inch Composit Push in Fittings, Inch Instant Fittings, Metric Instant Fittings, Two touch Fittings, pneumatic push on Fittings, Push To Connect schrader valves, Pneumatic Check valves, Stop fittings, Compression Fittings, Push lock misting Fittings, Push Fit Fittings, D.O.T. push to connect air brake fittings, DOT push in fittings, Brass D.O.T. air fittings, DOT air brake compression fittings, Threaded Fittings, BSP Fittings, DOT Air Hose Fittings, Brass Hose barb fittings, air connectors, air pipe fittings, Pneumatic Connectors, DOT Tubing, DOT Air Brake Tubing, SAE J844 air brake tubing, brass DOT air brake fittings, pneumatic component, Air Suspension |
|
|
|
|
